KN5000 help!

Posted by: hbinfo2001

KN5000 help! - 01/20/16 11:42 AM

Hi,Last week I bought an kn5000 like brand new (no finger print)

I have done a check for the update
I press on split+auto play+variation 3-4=result
Main program 1330=version 6
Main table 87
Sub program 140
Sound table 55
I had to upgrade with the last version 10
I update version 10 by pressing the panel memory 1 2 3 4
the update was successfull
I when back to make a check by pressing again split + auto play
+variation 3+4 and the result was
Main program 1354
Main Table 87
Sub Table 142
Sound Table 55
After I press digital drawbar+accordeon reg+gm special and on the screen right bottom it was V A
I would like to know why its not V10
Is it because I did not download the version 7,8 and 9 ???
I just whent from version to version 10
Thanks for your help
Posted by: Gunnar Jonny

Re: KN5000 help! - 01/20/16 03:37 PM

Version 10A is the very last update to KN5000 if i remember it correctly.
I cannot remember if it only was just A or 10A at the screen after update was done.
I'm not sure if v10A is downloadable here at SZ, if not, I have it with instructions about how to do.
Posted by: Bill Norrie

Re: KN5000 help! - 01/20/16 03:40 PM

Hi Howard,

It may be that the operating system is displaying the Hexadecimal number for 10... Hexadecimal notation (Hex) is often used in computer based instruments and their software.
In hexadecimal notation you have 0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f representing the decimal values of 0 to 15.

So hexadecimal 'a' is equivalent to 10 Decimal : 'b' = 11 etc.
Hex is usually written in lower case letters, but can also be written in upper case.
Posted by: hbinfo2001

Re: KN5000 help! - 01/20/16 06:42 PM

Hi GJ and Bill Thanks for your quick reply I had a kn5000 in the year 1999. Since my kn7000 fail on me I bought another kn5000 that I enjoyvery much But now I have to re learn my kn5000 At that time I have use your web sites and plenty of stuff for all the technics members and I am still on your web sites.A chance that your web sites are sill in operation
So I have lost all the sequensers ,maybe some one should send me some Ill appreciated.
Bill if I remember whe I had the kn5000 ,on the screen it was mark V10
But the kn5000 that I bought the version was version 6
and I download the version 10 without the version 7,8 and 9
I dont know if its ok
The version 10 came from:
Again thank you