Posted by: manorcourt1991
KN6000 problems - 05/29/05 06:15 PM
Hi all
My friend has a KN6000 with EW-65 upgrade. The operating system appears to have suffered some sort of corruption. It started with "garbage" being displayed instead of the "Please Wait" message when data is being loaded from a disk. Also it would not return to the main screen automatically. Hitting the exit button would return it to the main screen. Attempting to access the menu to reset the return to main screen timeout caused everything to lock up. Switching off the keyboard restored functionality except for the above mentioned problems. Initialising the keyboard either through the menu or at switch on made no difference. Gradually more functionality was lost with more lock ups and also menu selections accessing wrong parameters. Two attempts by a local and generally reputable service organisation failed to locate the cause of the problem. I ran the diagnostics as per the KN6000 service manual and everything was reported as OK. I then re-installed the operating system (actually upgraded from 7.0 to 7.1) 7.1 has been operating faultlessly in my former KN6000/EW-65 since I installed it soon after its release. Everything functioned normally for a few days and then the problems started to re-appear. My next thought is that the flash ROM itself is faulty, but the diagnostics show it as OK.
The "garbage" displayed on the screen has varied. At one stage it was a series of squares. Other times it looks like a random selection of non-English characters and occasionally it has displayed messages apparently correctly, but in German. In this instance changing the language and then resetting to English cured some problems but not permanently.
Any ideas?
Cheers
Len C.
[This message has been edited by manorcourt1991 (edited 05-29-2005).]
My friend has a KN6000 with EW-65 upgrade. The operating system appears to have suffered some sort of corruption. It started with "garbage" being displayed instead of the "Please Wait" message when data is being loaded from a disk. Also it would not return to the main screen automatically. Hitting the exit button would return it to the main screen. Attempting to access the menu to reset the return to main screen timeout caused everything to lock up. Switching off the keyboard restored functionality except for the above mentioned problems. Initialising the keyboard either through the menu or at switch on made no difference. Gradually more functionality was lost with more lock ups and also menu selections accessing wrong parameters. Two attempts by a local and generally reputable service organisation failed to locate the cause of the problem. I ran the diagnostics as per the KN6000 service manual and everything was reported as OK. I then re-installed the operating system (actually upgraded from 7.0 to 7.1) 7.1 has been operating faultlessly in my former KN6000/EW-65 since I installed it soon after its release. Everything functioned normally for a few days and then the problems started to re-appear. My next thought is that the flash ROM itself is faulty, but the diagnostics show it as OK.
The "garbage" displayed on the screen has varied. At one stage it was a series of squares. Other times it looks like a random selection of non-English characters and occasionally it has displayed messages apparently correctly, but in German. In this instance changing the language and then resetting to English cured some problems but not permanently.
Any ideas?
Cheers
Len C.
[This message has been edited by manorcourt1991 (edited 05-29-2005).]