Panel Memory

This is on a PR804 but I believe the KN7000 may have the same thing.

In the Expanded Panel Memory setup filters. What is the difference between:
• ACOMP&BASS VOL. and APC/SEQ VOL. filters?

Is there away to set the panel memory filters so that the R1, R2 and Left don't change Vol. when using the panel memory buttons?

I set both of the above to off, but the R1, R2 and Left Vol. still changed when pressing other panel buttons if the Vol. was different. I noticed when using the ACOMP&BASS VOL. set to off, the composer Vol. won't change when using different panel buttons. But couldn't tell if any happened when the APC/SEQ VOL. was set to off.

Thanks,

Anthony

Hi Anthony,

For what its worth, my KN6XXX does not have those selections as filters. I know this doesn't help you with an answer to your question but thought I would offer this observation because I suspect the KN7000 may not have them either. Does your manual not give you an explanation? I know the manuals leave a lot to be desired.

Chuck

The KN7000 does not have the above mentioned options in the Expand Mode Filter.

------------------
Willum

Hi Chuck and Bill:

Interesting that the KN's doesn't have those filters. Does your KN's have a filter to keep the R1, R2 and Left Vol. from changing when going from one panel to another if different settings?

Anthony