SD5 test

Hi,is there a way to make a sumcheck for my SD5 I have a serious problem with my sd5
thanks in advance

Hi I found the procedure and the report was
test report:
Flash test ....OK.....0000
22...Ram error ..ADDR
Dispo=9707==OK
40...DSP1 Empty=error
60..Rom Styles check...sum error
Floppy disk..test Ok
Hard test...OK

P/S in my sd5 hard disk I have 2 flah rom
Hope I will have help I am discorage

The problem its when I download some patterns from the hard disk or floppy disk the message is (5 pat flash write error)

Sorry I forgot to tell you that 2 days ago I download the version 1.0b and 1.0c in the sd5hd
thanks

hbinfo2001,

Please contact us at AjamInc@gmail.com.

Thanks,

Hi Aj,I just send you a message by email
Last night I done a test F1 and F10
The report test is:
Flash test OK 0000
22:Ram Error ADDR
Dispo=9707=OK
40:DSP1 Empty error check connection
Floppy disk==OK
Hard test =Ok
Hoping my problem will fix
Thanks in advance

Hi,I need help for my problème cannot download my patterns in thé flash rom thé only technician in Québec has quit thé job
I sent toi thé hard dis setup and presse and it was thé folder 22:.1.sty that open ,so i presse on it and my problème was note repair
Its possible toi have thé styflam.style
Thanks

Hi,I remove thé extension memory flash ram and the problème was resolve but my dealer told me to put back the extension memory to be shure that was thé problème,I done it and it was thé problèm I download 55 patterns. And it work fine.
I done another complète test and thé report was thé same has above.
Cannot believe its thé same report
Why?
Thank you

hbinfo2001,

I had sent you an mail to take out the extended flash and try and see if this worked.
Ignore the error test once the pattern flash is installed.

Thanks,

AJ

Hi, AJ Thanks for your reply but I never receive your email,and I dont know if you had receive mine on the 6 of july and I send it at ajaminc@gmail.com
Mine is hbinfo100@videotron.ca
AJ do you thing its true to remove the last version 1.0C from my sd5hd?
Thanks

AJ,Very important to check the latest version for the sd5 version 1.06c from ketron.it (software)because in this version there is a pattern =cancan.pat for xd9.If so do you thing I have to put back the version 1.06b in my sd5.Because that could may be my problem and maybe for other sd5 owners
Thanks
Ketron should be advise of this situation

AJ I done a mistake because I wrote 1.06b and 1.06c instead of 1,0b and 1.0c,sorry
But I download the version 1.0c for the SD3 and when I open it there is no pattern inside this version
And if you open the version 1.0c for the sd5 there is a pattern inside
Could this mean that the version 1.0c for my sd5 cause the problem for my extension flash ram
By the way AJ I had receive your emails yesterday
Thanks

YEs it did. The 1.0c is only if you have the USB drive installed.

I am glad you got the emails. For some reason, many have complained that there has been a delay in getting emails ... not sure what is happening ....

Hi,

maybe the NSA is too busy ( especially with all european mails and contacts ) so they just need more time to read all mails