MY Audya's Performing Perfect!!!!

Hi All,

A SPECIAL Thank you to Darren,(TonewheelDude)for his email supplied technical advice.

He provided me a fix for my Audio out problem which I've had since I bought the Keyboard four years ago.

In addition he supplied help on how to get to and clean dirty keyboard contacts. I had an A note giving me problems.

Problems are GONE!!!!

Playing Perfect! Come On NEW STYLES!

Thanks Darren.

Jim

He is the spesialist for the members Great man

Can you explain bether...???

can you forward the mail for me ?

necdet.doni@isbank.net.tr

can you forward the mail for me ?

marklivemusic@yahoo.com

Attention : Necdetdoni & Gokuss4 & Dusan

The e-mails I received from Darren, helped me with two specific problems.

1. Audio output, Right or Left Channel not working.

2. Dirty Contact in the KeyBed.

If any of you have either of these two issues, maybe this will help.

First you need to know how to take the top off of the Audya and not be afraid to get into it.

With the top open, you'll need to support it upright. If you try to lay it flat it will put stress on the ribbon cables running from the bottom half to the top half of the case.

The wires, I believe 4 of them, that run from the soundcard to the top right pcb is where the audio out problem occur's.

The connector on the top needs to be unplugged and the connector prongs need to be cleaned with Alcohol and a Q-Tip.

About two inches out from that connector, you'll need a wire retainer clip that has a sticky base to stick on the case. A small zip tie is then used to secure the wires to the retaining clip. This prevents the connection from moving, wiggling, vibrating ECT. It forces a tight bond between the male and Female ends of the connector.

2. Dirty contact's in the Key Bed.

If you have this problem, here is a link to a video that will offer some help on cleaning the contact's and contact surface on the PCB.

The video show's work on a Kurzweil, however the contact system is very similar to the Audya.

www.youtube.com/watch?v=HdWLspNBOWU

I hope this helps.

Jim

Thanks for the post. Much appreciated

Thanks Jim..

Jim,

How come you got dirt in the KB contact so quickly, glad to see Darren helped you he is a great guy, I would call him Mr Audya..

So quick?

I think jim has had his Audya for a few years now

Starting my 4th year on Her last Month and I've played the crap out of Her!

She's taken a licking...and keeps on ticking.

See Tony
4 years
And still rocking.

Dan,


You did some great Ketron demos a while back what happened, did you stop or are there any on the Audya.
If we wait for Leezone, we will wait forever...
Regards

Tony

Tony

good things come to those who wait...

Leezone you have certainly done that and I you, what new plugins are next.

whay is this thread frozen at the top?

Because it documents a fix for a hardware problem that all Audya owners could face at anytime so deserves to be kept clearly on view. Is there a reason it should be removed from the front page?

Ok I thought it was a general topic

What if we had a section JuST for these 'important" threads inside the Ketron section Mane make that the first thing at top
You'd click there and see the 4 or 5 frozen topics