Posted by: djcikot
xd9 DSP0 Error - 05/28/07 01:43 PM
Hello
I am Yunus Emre from turkey I have a problem.i load my xd9 ,x1's system files,to correct it what can i do .after,i load xd9's files again,it opens but it gives a error and there is no sound .message like this:
WARNING !!!
DSP0 Not Available 5
DSPO RAM Check Err: 74C3
Press EXIT
i am in a difficult situation,please help me
AJ Help Me please
[This message has been edited by djcikot (edited 05-28-2007).]
Posted by: Ketron_AJ
Re: xd9 DSP0 Error - 06/01/07 02:22 PM
Hi,
If you can open the keyboard, make sure the long ribbon cable that connects the CPU board (in the middle with the MIDI, Footswitch and Computer ports attached) and the DSP-SOUND board (with the Line and Mic outputs connected) is well in place. if this still doesn't work, you might need a new sound board.
Did you re-load the firm000.snd file to initialize the circuit?
AJ
Posted by: djcikot
Re: xd9 DSP0 Error - 06/01/07 04:29 PM
Dear AJ
firstly my english too bad i am sorry.
I didn't reload the firm000.snd because I can't find it and i can't load the turca.snd's to flash ram(8 mb)
I think when i load x1 files to my xd9T all of the sounds(internal sounds) deleted.
1)How can i load all of this sounds to xd9
2)how can i load firm000.snd to xd9t
3)how much is dsp-sound board
Thanks for your help aj i am waiting your reply
Posted by: Anonymous
Re: xd9 DSP0 Error - 07/03/07 12:44 PM
i ve the same probleme in my ketron vega
WARNING !!!
DSP0 Not Available 5
DSPO RAM Check Err: 74C3
Press EXIT
i am in a difficult situation too,please help us as soon as possible
Posted by: Ketron_AJ
Re: xd9 DSP0 Error - 07/04/07 11:27 PM
Email me at axa130@hotmail.com.
Subject: XD Original .snd file.
I will then send you the original file to fix your XD9.
Thanks,
AJ
Posted by: Mondoleb
Re: xd9 DSP0 Error - 10/14/08 11:01 AM
Can either confirm if reseating the cable resolved the issue?
Thanks,