There is no way to automatically convert the registration memory file from PSR-2000 to the Tyros, however the following method may help to reduce the manual conversion time.

1) Connect PSR-2000 MIDI out to Tyros MIDI in.

2) Set the MIDI Out status on the PSR-2000 and MIDI In status on the Tyros as follows:
PSR-2000 ch1 Main ==> Tyros ch1 Right1
PSR-2000 ch2 Layer ==> Tyros ch2 Right2
PSR-2000 ch3 Left ==> Tyros ch3 Left

3) Select one of the registration memories on the PSR-2000.

4) Store the current setting on Tyros to the registration memory.

NOTE: If a parameter setting for consecutive registrations is the same as the previous one, the PSR-2000 doesn't send a MIDI message. Yamaha recommends selecting several registration memories between steps 3 and 4 and then confirming that all parameters are updated. Yamaha arranger keyboards won't send parameter change data out the MIDI jack, if a parameter is already set. For example: if the current registration uses the style ''8 Beat 1'', which uses the GM Standard Drum Kit, and the next registration changes the style to ''8 Beat 2'' which also uses the GM Standard Drum Kit, the keyboard will not send the GM Standard Drum Kit patch change, because it's already on GM Standard Kit. Choosing a dissimilar Registration before selecting the final one helps to insure that all of the patch changes and other required information is being transmitted out the MIDI jack.

Hope that helps,


------------------
Steve Deming
Assistant Manager
Customer Support Dept.
Pro Audio & Combo Division
Yamaha Corporation of America
_________________________
Yamaha Customer Support
www.yamaha.com/pacsupport
714.522.9000