SYNTH ZONE
Visit The Bar For Casual Discussion

Topic Options
#13928 - 12/04/07 02:46 PM Vintage Keys Midi problem.. some sounds are wacky!
Anonymous
Unregistered


most of the patches work fine
but some of them are wacked out and sound horrible. like digital noise and stuff. i did full diagnostics by holding down the cursor keys and powering on the unit and all tests passed except the midi test. it just said

midi test FAILED!

any idea what to do from here? i have used midi-ox to clear out the sounds and dump the sisex data and also removed the battery and placed it back in.

any help is appreciated!
ps i can solder and have basic knowledge of electronics

Top
#13929 - 12/05/07 09:36 AM Re: Vintage Keys Midi problem.. some sounds are wacky!
Justin Gazda Offline
Member

Registered: 06/21/06
Posts: 89
Loc: Marietta GA, USA
I don't believe its just an issue with midi. If its one of those digital rom sound oberhiems open it up.

First check to see if the power supply is giving the board the right voltages. It should be sending 5, 12, 15 volts, one of those numbers. The voltage regulators will correspond with being 7805, 7812, 7815. etc.

Make sure the five volt section is working well and giving you five volts. If it isn't, fix the power supply, then try working the machine. Also go ahead and replace that battery with a new one.

If it still doesn't work and you see great big square chips with what looks like hundreds of little legs on them, you are screwed. If you see rectangular chips with legs numbering in the twenties, you might have a chance of finding and replacing the bad ones.

But i'll make a prediction here and now that the former is the case and your box is dead.

Top



Moderator:  Admin 



Help keep Synth Zone Online