Hi SBPC. This is actually a simple procedure and after a few saves, it comes naturally. Load the style you want to save into composer memory, (default memory is A), then press program menu> composer> custom style copy. Select memory A, B, or C to copy to custom memory position 1 through 20, and when finished, exit. Remember, one load for each memory slot in custom memory. Now, press the SD card button> save> Technics format which gives you a page to select which folder you want to save your work into and which file to name. (I use 20 custom files to each of the files in the folder, but you won't need to pack it this full.)After naming your folder and files, go to page 2 (using the long button on the right) and select which parts of the styles to save. If you are only interested in transferring the styles or presets, switch panel memory and composer to yes (or all the others to no), and make sure the :all custom
style : on
the lower right is also on (yes), then press SAVE and it's transferred in only a few moments. You can save each part of the style if you want, but the parts you won't need will take up memory on the SD card. If you are going to transfer a lot of styles this way, it's a good idea to make a file in folder 99 with just one style saved and label it "Clean Sweep" so you can clear all the custom slots in one pass. Load it after you've saved the styles to SD and you will clear the custom styles with just one file in slot 1 which will be overwritten by the first save. Good luck.

[This message has been edited by Bud Whipple (edited 08-20-2006).]