Quote:
Originally posted by Hound Dog:
As I said, I don't use JV1010 dials - I run everything from SysEx messages, and maybe that's what this JV is best for. But you might be able to set a control channel from the dials - I know it has several setup modes printed on top of the case, and explained in the manual.

Otherwise, you'll need to use SoundDiver to set it, or use these sysex messages:

Set GM Mode Off
F0 7E 7F 09 02 F7

Set Performanec Mode ON
F0 41 10 6A 12 00 00 00 00 00 00 F7

(so far, you can definitely do this from the front panel)

Lastly, set the control channel to 16:
F0 41 10 6A 12 00 00 00 1C 0F 55 F7

Here are the messages for other control channels:

Ch 1: F0 41 10 6A 12 00 00 00 1C 00 64 F7
Ch 2: F0 41 10 6A 12 00 00 00 1C 01 63 F7
Ch 3: F0 41 10 6A 12 00 00 00 1C 02 62 F7
Ch 4: F0 41 10 6A 12 00 00 00 1C 03 61 F7
Ch 5: F0 41 10 6A 12 00 00 00 1C 04 60 F7
Ch 6: F0 41 10 6A 12 00 00 00 1C 05 5F F7
Ch 7: F0 41 10 6A 12 00 00 00 1C 06 5E F7
Ch 8: F0 41 10 6A 12 00 00 00 1C 07 5D F7
Ch 9: F0 41 10 6A 12 00 00 00 1C 08 5C F7
Ch 10: F0 41 10 6A 12 00 00 00 1C 09 5B F7
Ch 11: F0 41 10 6A 12 00 00 00 1C 0A 5A F7
Ch 12: F0 41 10 6A 12 00 00 00 1C 0B 59 F7
Ch 13: F0 41 10 6A 12 00 00 00 1C 0C 58 F7
Ch 14: F0 41 10 6A 12 00 00 00 1C 0D 57 F7
Ch 15: F0 41 10 6A 12 00 00 00 1C 0E 56 F7

Hope this helps,
Hound Dog


WOW!!! Ta very much!!! I'll give it a go - even if I don;t know how. Thanks again.
Swift Arf ...
_________________________
?